Chia Ming Machinery Co., Ltd.

Automatic PET Stretch Blow Molding Machine

Home > Products > PET Series > Automatic PET Stretch Blow Molding Machine

Model: CMA-2000BD / 2000CS / 2000CD
Automatic PET Stretch Blow Molding Machine - Video
Automatic PET Stretch Blow Molding Machine
This is a new generation of fully automatic and versatile machine for mass production of PET bottles and jars with volumes up to appoximatly 200-6000ml. Ideally suitable for large scale factories and for applications where stringent quality requirements have to be met. Substantial reduction in operating cost is achieved by saving of manpower.

Production Samples :

Sample of Automatic PET Stretch Blow Molding Machine

Specifications :

Model CMA-2000BD CMA-2000CS CMA-2000CD
Container Max. neck diameter Ø38-Ø90mm Ø63-Ø120mm Ø63-Ø120mm
Max. production capacity 1200pcs/hr 600pcs/hr 1100pcs/hr
Max. body diameter 120mm 180mm 180mm
Max. container height 320mm 340mm 340mm
Max. bottle capacity 2000m 6000m 6000m
No. of cavities 2 1 2
Mould Carry pitch 152.4mm 228.6mm 228.6mm
Mould center distance 152.4mm 228.6mm 228.6mm
No. of preform mandrels 44 28 38
Heating oven No. of oven 3 3 4
No. of infrared heaters
in each oven		 8 9 9
Heating load (max.) 48 54 72
Air pressure Low pressure 7kg/cm² 7kg/cm² 7kg/cm²
Hight pressure 35kg/cm² 35kg/cm² 35kg/cm²
Cooling water Cooling capacity 18000kcal/h 14000kcal/h 18000kcal/h
Water consumption 80L/min 70L/min 80L/min
Water temperature 10-12°C 10-12°C 10-12°C
Pressure 2bar 2bar 2bar
Total consumption power 96kw 59kw 77kw
Machine dimension 3.5x1.9x2.2m 3.45x1.9x2.2m 4.5x2.25x2.2m
Machine weight 6.5ton 6.5ton 7ton
All specifications and designs are subject to change without notice.
Go Top